03301026
 |
KellemsŪ Rotating Eye, K-Type Pulling Grips are made of high strength galvanized steel strand. All Grips feature double weave mesh for greater strength and added mesh contact on the cable, to handle longer or heavier pulling jobs. The forged eye mates easily with a swivel or shackle. |
| Hubbell Wiring Device-Kellems Product Specifications | |
|---|---|
| Product Type | Pulling Grips |
| Pulling Grip Type | Underground Rotating Eye |
| Underground Rotating Eye Length | Standard |
| Cable Range | 1.50"- 1.99" (3.81-5.05) |
| Breaking Strength lbs (n) | 16400 (72,947) |
| Approx. Length of Grip | 41" |
| Dimension A | 1 3/8" (3.49) |
| Dimension B | 1/2" (1.27) |
| Dimension C | 1 11/16" (1.75) |
| Dimension D | 1" (2.54) |
| Dimension E | 7" (17.78) |
| Dimension F | 4 1/2" (11.43) |
| Dimension M | 34" (86.36) |
| Rotating Eye Diameter | 1 3/8" (3.49) |
| Certifications | CSA Certified |
| Application | |
|---|---|
|
Rotating Eye, K-Type Pulling Grips are specially designed for use in the installation of underground power cables, communication lines and service lines into factories, shopping centers, construction projects and general underground electrical construction. |
| Safety Information | |
|---|---|
|
The broad application of Kellems grips on a wide variety of objects requires that adequate safety factors be used to establish working loads. The approximate breaking strength of a Kellems grip represents an average calculation based on data established from actual direct tension testing done in our engineering laboratories. It is impossible to catalog or guarantee a safety factor suitable for all applications as operating conditions are never the same. The tension, diameter, movement, number of objects gripped, gripping surface, and the attachments used are just some of the factors which vary with each application. These factors, together with the effects of abrasion, corrosion, prior use or abuse and any other variables of a specific application, must be considered by the user and the grip replaced as appropriate. Where the conditions of the application are not well defined or known, or where risk of injury to persons or property is involved, a greater safety factor should be utilized. Under normal conditions, Kellems' recommended factor of safety is five for catalog listed pulling grips, and ten for catalog listed support grips. The factory should be consulted for specific application recommendations where strength and holding power are important factors. Any warranty as to quality, performance or fitness for use of grips is always premised on the condition that the published breaking strengths apply only to new, unused grips, and that such products are properly stored, handled, used, maintained, and inspected by the user at a frequency appropriate for the use and condition of the grip. |
| Benefits | |
|---|---|
|
 |
